How To Change A Hoover Vacuum Belt

Simple vacuum repairs tin can be performed at abode, and knowing how to change a vacuum belt is a great way for whatsoever vacuum possessor to save time and money at the store.

Because vacuum belts are fabricated to stretch, wear out, and eventually pause, every vacuum owner can salve fourth dimension and money by knowing the basics about vacuum belt replacement.

Luckily, changing a vacuum belt is a very simple repair on well-nigh vacuum cleaners. V acuum owners should never have to take their machine to a store just for a belt replacement.

The first pace in this (and any) part replacement is to accurately order the needed part for the repair.

For more information about the different kinds of vacuum belts available on the market and how to accurately order the correct belt for your vacuum, please read our "Vacuum Belt Buying Guide" article.

Step i: Admission the Vacuum Belt and Brushroll Area

Vacuum Belt Replacement Steps

Each specific vacuum style and model is different, so belt replacement steps can differ a little from one to the next. Despite these differences, all vacuum chugalug replacements share similar qualities.

This article'southward instructions are generalized so that they can help practise-it-yourself vacuum owners with their chugalug change repairs, regardless of the vacuum type or model.

We use a common upright style vacuum for our belt replacement demonstration, The Hoover U5458-900 WindTunnel Supreme.

This repair can accept less than five minutes on nearly vacuums, especially once an owner is familiar with their model.

ane. Access the vacuum belt and brushroll surface area.

Vacuum belts work to spin a vacuum'southward castor roller and/or, on some self-propelled models, to turn a vacuum's wheels.

Any the manner of vacuum, this repair will accept place in the machine'due south brushroll area.

For most vacuum cleaners, opening the brushroll expanse simply means removing a bottom plate on the cleaner, one similar to the Hoover WindTunnel pictured below.

In the case of our demonstration model, removing the bottom plate only involves unscrewing four Phillips screws.

Step 2: Remove the Brushroller and the Old Belt

Now that the bottom plate is off, t he old (or broken) chugalug will easily come up out of the vacuum.

Before removing the old belt and the brush ringlet, have a await at how they are arranged in the vacuum and how they connect to each other.

The chugalug on our Hoover WindTunnel (pictured below) is a flat vacuum belt type that is held between the motor shaft and the brush roller past its rubberband tension.

Beginning, pull the brushroll out of the vacuum and slide it out of the chugalug loop. And so, remove the other end of the vacuum belt from the motor shaft.

Pace 3: Install the New Vacuum Chugalug on the Motor Shaft and Castor Roller

Heads up! If your vacuum model takes a round or flat vacuum belt type, that ways the belt is held between the motor shaft and the brushroller with tension. The new belt may seem too small for the vacuum.

This is well-nigh-likely normal and to be expected. Double check that you take the right part for your vacuum just in case, but be aware that circular and apartment vacuum belt types stretch a great deal over time. Geared and five-belts also stretch, but not near as much.

The old belt you lot are replacing will nigh likely appear much bigger when held upwards to the new belt on account of all the stretching information technology has gone through with vacuum utilise.

Offset, slide the new vacuum belt around the vacuum motor shaft. Once it's on the shaft, thread the castor roll through the other end of the chugalug.

Step 4: Install the Castor Roller With the Belt Correctly Positioned on It

Whatever the vacuum style, the idea is to return the brushroll and belt to their original positions before closing up the vacuum housing.

For vacuums that apply round and flat belts, a little muscle is needed to pull the brushroll into position with that unstretched new belt on information technology.

On our demonstration vacuum, the side of the brushroll reverse the belt has notch that fits into the vacuum. After installing that side of the brush, a proficient pull on the belt side of the roller will snap it right into identify (sentry your fingers).

This is really much easier if done continuing over the vacuum with it lying on the basis. A advisedly placed foot tin provide the right counterweight.

Stride five: Reassemble the Vacuum

Render the bottom plate of the vacuum and/or any other housing pieces removed to admission the brushroll area. For the WindTunnel, that just ways returning those 4 Phillips screws and bottom plate removed before.

This repair is at present complete. Depending on the vacuum belt type, your new vacuum anarchist belt can last you months to years before another replacement.

Conclusion

To see our total inventory vacuum cleaner belts hither at eRepalcementParts.com, visit our Vacuum Belts page. The belts displayed on the page tin can be filtered by way, shape, and manufacturer thanks to our integrated search features.

To navigate directly to the belt that fits your specific vacuum, enter your vacuum's model number in the search field at the top of this page. Clicking get will take you to your vacuum'southward parts folio and breakdown diagram.

Cheers for taking reward of this Instructable and eReplacementParts data resource!